Induction brazing of thermocouples with wire dispensers allows precise control of the amount of alloy used.
Induction brazing of thermocouples makes the quantity of solder used controllable, increasing the repeatability of the process.
Induction brazing of thermocouples requires particular attention to guarantee the correct functioning of finished products, especially in the household appliance sector.
To ensure that the two parts, one brass and one steel, are brazed correctly, a repeatable process must be performed.
With induction brazing it is possible to use an automatic dispenser of the brazing alloy wire. The dispenser comes into operation when a pre-set temperature is reached. It is possible to set the quantity and speed of the alloy necessary to obtain quality brazing. This function allows you to always use the same quantity of alloy, avoiding the presence of both holes and excess alloy.
A high frequency Platinum HF6 generator was used in the process: with a heating time of 5 seconds it is possible to bring the piece to temperature and dispense the correct quantity of alloy. An open inductor was used for the process. The temperature was monitored using a thermal image camera.
The customer is our focus: it is the commitment to excellence that we carry forward at Seit Elettronica.
In our company we have always considered customers at the center of our development and sales processes. We are convinced, in fact, that only a methodical approach that brings out critical issues and needs within production processes generates added value and successful investments.
Ready to transform your production process? Contact us, and let's build something extraordinary together.
